CCTV Installation Sydney
CCTV Design, Installation and Service Across Sydney
CCTV installation is the process of designing, wiring and setting up security cameras so they record the areas you need covered. Our team designs, installs and maintains CCTV systems for homes, businesses and strata buildings across Sydney. We help you plan camera placement, select the right equipment and connect your cameras to monitoring, alarms and access control where it adds value.
Our team runs as a full-service security company, so your CCTV sits within our wider security services rather than on its own, designed, installed and serviced by one team.
The Right Camera for Every Spot
Picking the right camera for the right spot is the start of any CCTV installation. The types we most commonly install:
IP Cameras
Footage over a network (Internet Protocol). High resolution, remote viewing and clean integration with other systems.
Analogue Cameras
Video over coaxial cable to a recorder. Practical for upgrading older systems or working to a tighter budget.
Dome Cameras
Discreet indoor housing for shopfronts, reception areas and foyers where you want coverage without drawing attention.
Bullet Cameras
Weatherproof outdoor cameras with a longer range, suited to driveways, entry points, car parks and perimeters.
PTZ Cameras
Pan, tilt and zoom on command (PTZ). One camera covers a wide area on warehouses, construction zones and car parks.
Night Vision and Low-Light
Infrared and low-light sensors keep recording clearly in the dark. Standard for any outdoor camera covering overnight.
Every system we install can be viewed live from a phone, tablet or computer. Check any camera from anywhere with an internet connection, receive motion alerts and review recordings without being on site.
CCTV for Homes, Strata and Business
The right setup depends on what you’re protecting and who’s using the property.
Homes
We typically cover the front door, driveway, garage and backyard. Remote viewing lets you see who’s at the door and watch the property while you’re away, and footage supports insurance claims and gives police something concrete.
Strata & apartment buildings
Common areas, car parks, entry doors and lifts are the priority. We integrate cameras with intercom and access control so committees can see who enters, track parcel theft and manage shared-space disputes.
Commercial & retail
We typically cover the front door, driveway, garage and backyard. Remote viewing lets you see who’s at the door and watch the property while you’re away, and footage supports insurance claims and gives police something concrete.
Industrial & construction
Site security, safety compliance and theft prevention. We install CCTV built to handle dust, weather and power constraints, with remote monitoring for unmanned sites overnight and during shutdowns.
Integrated Security From One Team
CCTV on its own records what has already happened. Connected security means cameras work alongside the rest of your setup to prevent, detect and respond in real time, and we install and service every layer.
- CCTV and alarms. When the alarm triggers, the cameras capture what caused it, so you get footage of the event rather than an alert with no context. Connecting CCTV to our alarm systems shows you what happened, not only that something did.
- CCTV and back-to-base monitoring. A monitoring station watches your cameras and alarms around the clock through our back-to-base monitoring. If something activates, they verify the threat and dispatch a response.
- CCTV and access control. Linking cameras to our access control matches every entry with footage, so you see who opened the door, not just that a card was used. Useful for commercial sites, strata car parks and any building with multiple users.
- CCTV and keyless entry. Combining smart locks from our keyless entry systems with cameras at entry points gives a full picture of who comes and goes, including deliveries and short-term access.
Our team brings CCTV, alarms, monitoring, access control and locksmithing together as a single connected setup, designed and serviced by the same crew.
Trusted CCTV Brands
We work with established CCTV brands known for reliability, local support and long product lifecycles: Hikvision, Dahua, Hilook, Axis, Avigilon, Milesight, Hanwha and Bosch.
The brand we recommend depends on your property, budget and integration requirements. If you’re upgrading an existing system, we can often add to or replace components rather than start over.
Our Installation Process
Every CCTV job we do follows the same path, so you know what to expect from the first call to handover:
- Site assessment. We visit the property, walk through your concerns and map camera positions.
- System design. We recommend cameras, a recorder and storage based on the site and how you plan to use the system.
- Quote. You receive a written, obligation-free quote.
- Installation. Licensed technicians run cabling, mount cameras, configure the recorder and test every angle.
- Handover. We set up your phone app, show you how to review footage and explain day-to-day maintenance.
- Ongoing support. We service what we install. If something stops working, we come back and fix it.
All work complies with the relevant Australian Standards.
CCTV camera system installation across Sydney
- Eastern Suburbs: Our Botany shop is based here, so the Eastern Suburbs are where we install and service the most closed-circuit television (CCTV) camera systems, from single-camera setups to full multi-camera coverage.
- Inner West: Newtown, Marrickville, Leichhardt and surrounds. Our team assesses your property, recommends camera placement and books an installation date that suits you.
- Sydney CBD & Inner City: We fit out offices, strata buildings and commercial premises across the CBD. Being based nearby in Botany keeps site visits and follow-up service straightforward.
- North Shore: Installations are a regular part of our week. We confirm the coverage plan and provide a written quote before any cabling goes in.
Talk to Sydney's Expert Security Team
Speak to our team about camera selection, integrating cameras with alarms, access control and back-to-base monitoring, or just ask what makes sense for your site.
Why Sydney Customers Trust Abbco for CCTV
Locally based in Botany
We operate from 1455 Botany Road, so our local team installs your CCTV and handles any service afterwards.
Accredited & Licensed Locksmiths
Accredited and licensed for security work, so your cameras are installed to industry standard.
24/7 Monitoring & Support
Remote viewing and back-to-base monitoring options keep your property covered around the clock.
One Provider, One Integrated System
Your CCTV works alongside our alarms, access control and monitoring, set up and maintained by the same team.
Backed by 35 Years of Experience
Family-run Business
Run by brothers Stuart and Steve, we build long-term relationships and stand behind the systems we install.
Trusted by Sydney Homes and Businesses
Frequently Asked Questions
How much does CCTV installation cost in Sydney?
Pricing depends on the number of cameras, the resolution, the recorder type, how much cabling we need to run and how easy the site is to access. We provide a written, obligation-free quote after a site assessment rather than over the phone.
How many CCTV cameras do I need?
For most homes, four to eight cameras cover the front door, driveway, garage, backyard and any blind spots we identify on the walk-through. Commercial sites vary widely: a small shop might run with three, a warehouse can run to twenty or more.
Is it better to get wired or wireless CCTV cameras?
Wired is more reliable in most cases. The signal is steady, the resolution can run higher, and the cable that sends data also powers the camera. Wireless is useful when running cable is impractical, but it depends on wifi reliability and battery management.
What is the difference between IP and analogue cameras?
Analogue uses coaxial cable and records to a Digital Video Recorder (DVR). IP uses a network cable and records to a Network Video Recorder (NVR), usually at a higher resolution, and it handles remote viewing more easily.
Can CCTV work without the internet?
Yes. Most new cameras record straight to the DVR or NVR on site, so footage keeps saving even if the internet drops out. The internet is only needed for the extras: remote viewing, cloud backup and push alerts. Core recording keeps running either way.
Do I need council approval to install CCTV in Sydney?
For most private homes and businesses in New South Wales, no. CCTV can be installed on your own property without council sign-off, and the rule of thumb is to keep cameras pointed at your own land, not a neighbour’s yard or a public footpath. Strata buildings are different: the committee usually needs to approve cameras in common areas, so we check the by-laws with you first.
Book a CCTV Site Assessment Today
Send us the property details and what you’re looking to cover, and our team will come back within one business day with the next steps for a site assessment and an indicative scope. For urgent security concerns or active alarm issues, call 02 9389 1166 directly rather than using the form.
